Samsung TVs are among the best on the market. Things may not go as planned with every TV. It can be very frustrating for your TV not to turn on. After all, its primary job is to display content.
A Samsung TV with a red flashing power lamp indicates a power cut. But, it may also indicate an issue with the HDMI connector or a technical fault. You can either replace the television’s power supply if it is not working properly or reset the HDMI connector to fix the problem.
Your TV might not be working properly. But don’t let it go without reading this troubleshooting guide. Please find out more about why your Samsung TV flashes and how to fix them.
Samsung TV Not Turning On, Red Light Flashing
You decide to start a media streaming, TV watching, and gaming session on your TV. You want to unwind from a long workday and relax. You settle down in your seat and then reach for the remote.
You press the power button again on your remote. But nothing happens. You keep pressing it, maybe giving it another go, but it doesn’t work. You eventually realize the batteries may be dead, so you switch on the TV.
As you approach the television, the red light on the screen flashes. The red light turns off when you press and hold the power button. You can press it again to turn the light on, but nothing appears on the screen.
If you’re here, this is at least partially your current situation. And we know exactly how you feel right now. This is one of the most tragic things that can happen next to a television. Taking a deep breath and examining the problem when technology fails is crucial.
What Does the flashing red light from a Samsung Galaxy mean?
When you turn on your Samsung TV, you may experience a flashing red light. Several different factors could cause this. These are the possible reasons that your Samsung TV is flashing red.
An unreliable power supply could cause your Samsung TV’s flash red light. A bad electrical outlet or damage from a surge to the power supply could cause this loss of power.
Software glitch: The TV may not be able to connect if it was disconnected from the power supply while installing a new software update.
Hardware defect
HDMI port defect. This happens when you connect an appliance or gaming console to your television and turn it off without switching the HDMI input. It can cause the TV’s source input to malfunction. This can also prevent your TV from turning on.
As you can see from the above, not all flashing red lights are serious.
How to Fix a Samsung TV’s red blinking light
In certain cases, a Samsung TV with a flashing red light can indicate a serious malfunction in the hardware. Sometimes, though, you can fix the problem by making some adjustments to the TV.
Identifying the problem
We must identify the problem as soon as possible and then isolate the root cause. For this purpose, we will run some basic checks that will help us determine whether the problem is with the television’s software or hardware. To do this:
- Ensure your TV is switched on and the standby Light (located under the lower right of the TV) is on.
- If it is, push the “Power” button on your remote and turn it On.
- The TV is connected correctly to the power supply if it turns on.
- Also, ensure that the screen’s power is on by gently tapping your finger lightly on the screen.
- If the screen blinks, this means that it is working properly.
- If your screen doesn’t blink or the LED doesn’t turn on, this could mean that there are problems with the remote or power supply. The Samsung TV may have a black display.
Reboot the TV
A red light on your TV might indicate that the power supply is not working properly. The TV may then turn itself on again. It could be an issue with your TV’s power supply. It is possible there was a problem with the power IC.
This is most likely due to the TV being on for a prolonged period. If the TV is turned on for a longer amount of time, the IC heats up, causing the red light blink to turn off.
You must ensure that the power IC has cooled to resolve this problem. You can do that by restarting the TV. Just disconnect the power cable from your TV and wait approximately ten mins.
- Turn your Samsung TV off and then on again.
- Rebooting a device fixes a bug that can take much longer to diagnose.
- It is important to test simple solutions before you go into more complicated procedures.
- A Samsung TV should be turned off immediately if there is another problem.
- This will save you both time and effort. This will save you time and money, especially if you do not resolve the issue.
Blown Fuse
Your Samsung TV may not turn on if it has a blown a fuse. If the TV doesn’t turn on, check the back for a red light.
If there is a red light, the fuse may still be in place, and you will need to replace its power cord. If the red light is not visible, the fuse has likely blown.
You will need a drill and a new fuse to replace the fuse. The first step is to remove the back panel. Locate the fuse box, then locate the blown a fuse. Once you find it, replace the old fuse with a brand-new one. Finally, screw back the back panel and plug in your TV.
HDMI Glitch
A game console can sometimes prevent a TV from turning off via an HDMI(input), a common glitch in Samsung TVs. This happens when the console is turned off without changing its HDMI input source. If this happens, the TV may not be able to start properly.
After a power cut, Samsung TV won’t turn on.
I tried unplugging the device and plugging it back into it, but it did not work. The power button is not lit up. This TV has been my own for about a decade and a half. I have never had any problems until now. Does anyone know of any problems or solutions?
There are several possible reasons your Samsung TV will not turn on when there is a power failure. First, ensure that the TV is properly connected to an outlet. If it isn’t, then unplug it and plug it in again.
If that fails, then you need to test the circuit breaker. Sometimes, a power surge may cause the TV not to turn on. In this case, reset the breaker, so the TV turns on again.
Samsung Warranty Claims: Contact Samsung
If all your options have failed, it’s time for you to take out the warranty that came with the TV.
The good news? Your warranty should cover a power supply failure.
It is bad news that Samsung doesn’t offer a top-notch warranty on its products.
TVs come with a 1-year warranty. Many TV owners are likely to be without luck.
Samsung will send you a new TV free of charge if your less than one-year-old TV has a failing power board.
Final thoughts on Samsung TV Red blinking Light
All possible solutions are available for Samsung TVs not turning on.
You can still contact Samsung’s product support for a more detailed explanation of why your TV isn’t turning on.
Media reported that Samsung was ranked No.1 worldwide in the TV market for the 15th straight year. It is a major player in the global TV market, with a 31.8% share of revenues.
Unfortunately, the products are not without their faults and flaws. This shouldn’t be a concern if you purchased your TV in the past year. Your warranty will cover you.